|
|
|
|
|
Support of One 80-bit, Full, Medium or Base Camera Link® Configuration Camera |
|
|
Monochrome, Bayer CFA, and color RGB progressive-scan cameras supported |
|
Full pixel clock range: from 20 MHz up to 85 MHz |
|
Serial control of Camera Link cameras: |
|
The application software can use the Camera Link API functions to control the camera. Alternatively, the serial line can be configured as an additional PC COM port ensuring interoperability with existing camera control software. |
|
ECCO: Extended Camera Link Cable Operation |
Go beyond Camera Link specifications at no additional cost! |
Operate with 30% longer cables, achieve 30% higher speed or use less costly cables |
To learn more about ECCO, download the "About ECCO" pdf file. |
|
On-Board Pre-Processing |
|
|
3 Look-up table (LUT) operators |
|
- |
Monochrome operation with selectable output bit depth: 8 bits, 10 bits, 12 bits or 16 bits |
|
- |
RGB and Bayer color operations with selectable output bit depth: 3 x 8 bits, 3 x 10 bits, 3 x 12 bits or 3 x 16 bits |
|
Bayer CFA decoder computes the R, G and B components of the image |
|
Pixel formatting in the following formats: |
|
- |
Monochrome formats: Y8, Y10, Y12, Y14 and Y16 |
|
- |
Bayer CFA formats: BAYER8, BAYER10, BAYER12, BAYER14 and BAYER16 |
|
- |
Three packed RGB components format: RGB24 |
|
- |
Three planar RGB components formats: RGB24PL, RGB30PL, RGB36PL, RGB42PL and RGB48PL |
|
- |
Four packed RGB plus alpha components format: RGB32 and ARGB32 |
|
Image reconstruction: tap re-ordering, H/V flipping |
|
High-performance DMA transfers into user allocated memory with 64-bit addressing capability with image cropping capability |
|
10 digital I/O Lines Compatible with a Wide Range of Sensors and Encoders |
|
|
It forms a rich set of I/O lines with, per camera: |
|
- |
4 isolated current-sense inputs for a wide voltage input range up to 30V |
|
- |
4 isolated contact outputs |
|
- |
2 high-speed differential inputs |
|
Moreover, +5V and +12V power outputs with electronic fuse protection are provided. The Grablink Full, DualBase and Base I/O lines can be used as general-purpose I/O lines. They also have specific usages as trigger, strobe or quadrature encoder input lines. |